No products in the cart.
The VIS-PS100 is a power supply for door access control. It is small sized with high reliability while maintaining efficiency for its electromagnetic compatibility. Its input voltage ranges from 110-240V AC and an output voltage of DC12V and current of 3 Amps. This unit is ideal for a simple access control system with products such as magnetic locks, keypads, and exit buttons.
- Input voltage range
- Small size, high reliability
- Electromagnetic compatibility, efficiency
- Protection function with door remote control
| Input voltage | 110 ~ 240V AC |
| Input Frequency | 50 ~ 60Hz |
| Output Voltage | DC12V |
| Output Current | 3A |
| Output Voltage Trim Range | ±10% ~ ±15% |
| Load | 1% Typical |
| Output Stability | 0.5% Typical |
| Ripple and Noise | 1%, peak to peak (100mVp-p typical) |
| Insulation voltage | Junior / sub-polar inter-1500V AC, primary / shell between 1500V AC, sub-polar / Shell between 500V AC |
| Hold Time | Full load typically 20ms |
| Operating Temperature | -20°C ~ +65°C (-4°F ~ 149°F) |
| Overload Protection | All outputs in a short circuit, overload are protected. Power output of 0-15 seconds delay locks |
| Outer Steel Case Size | 120mm x 95mm 38mm (4.72in. x 3.74in. x 1.49in.) |
| Weight | 315g |
Related Products
